Ford Powerstroke 6.7L Tuning Information Commander 2020-2022
What You Need to Tune Your 2020-2021 Ford Powerstroke 6.7L Pickup:
- Commander Unlock & Tuning Tool with Ford Harness (Ignore the orange wire in the kit)
- Commander Credits (8 for 2020-2022 Ford) - [8 Credits are included with the device for the first truck.]
- Tuning Files
- Autoflasher Software (Click to download)
Note: For 2022 models, you can either use a single tune file (+30HP) or swap to a 2021 ECM to enable SOTF tunes.
After receiving your parts, use the Commander to capture your ECM, TCM, and Cable serial numbers.
Please visit this page to submit the following details:
Â
*Ensure you provide the correct serial numbers. ECM readings through OBD differ from direct ECM readings. If incorrect, you may waste your credits and need to buy additional credits. Please confirm the serials carefully.
To obtain the ECM serial number, follow the methods below:
- 2020-2021 Ford - Connect to the ECM connector, serial number starts with "40".
- 2022 Ford Level 1 ECM (22 ECM only) - Connect to OBD port, serial starts with "37".
- 2022 Ford (ECM swap only) - Connect to the 21 ECM connector, serial starts with "40".
- All years: Connect to the OBD port. Serial number starts with "59".
After providing your information using this submission tool, expect 3-5 business days for tune file creation and delivery.
While it's not mandatory, it’s advised to read your ECM before tuning. This ensures you have a backup of your stock file, which is essential for reverting to stock settings later on.